Processing of GB6675 test reports for children's push toys
Date：2025-11-11 09:27:25 Classification
：【question】 Visits：
GB6675 standard applies to all toys, that is, all products or materials designed for or intended for use by children under the age of 14. According to the requirements of the Chinese mandatory standard GB 6675 "Toy Safety," children's push toys must pass certification testing before they can be sold on the market.
I. Detailed Application Process
1. Preliminary Preparation Stage
- Product Category Confirmation
Determine whether the push toy falls within the scope of GB 6675 (applicable to children under 14 years old), focusing on whether it contains risk points such as drive mechanisms, folding functions, and detachable parts.
- Laboratory Qualification Selection
Select a laboratory with CNAS (China National Accreditation Service for Conformity Assessment) and CMA (Certification and Accreditation for Inspection and Testing Institutions), such as Dezeway Testing (CNAS registration number: L8083).
- Sample and Technical Document Preparation
- Provide 3-5 complete sets of finished products (including packaging and instructions);
- Technical documents include: product drawings, BOM (Bill of Materials), material declaration (e.g., plastics/coatings/textiles), and MSDS reports for paints and inks.
2. Core Testing Items (Focusing on Key Aspects of Push Toys)
| Test Category | Specific Items and Requirements
| Physical and Mechanical Properties | Small parts testing (to prevent suffocation), sharp edges/points, folding mechanism strength (≥30N force without collapse), braking performance (ramp parking test)
| Flammability | Fabric burning rate ≤30mm/s (GB 6675.2)
| Chemical Safety | 19 migratable elements (lead ≤90mg/kg, cadmium ≤75mg/kg, etc.) + 6 plasticizers (DBP/BBP/DEHP ≤0.1%)
| Electrical Properties (if applicable) | Battery-powered toys must comply with GB 19865 to avoid overheating or short circuits
3. Submission and Testing Process
1. Contractual Agreement: Sign an agreement with the laboratory, clarifying the testing standards (GB 6675.1-2014, GB 6675.2-2014, GB...) 1. Standards: GB 6675.3-2014, GB 6675.4-2014);
2. Payment: Approximately ¥8,000-¥20,000 (including difference testing), depending on project complexity;
3. Laboratory Testing: The cycle is typically 10-15 working days (additional fees apply for urgent cases);
4. Rectification and Retesting: If the test fails, an improvement plan must be provided and samples resubmitted (an additional 50% fee will be charged).
4. Report Acquisition and Certification
- Upon successful testing, a Chinese test report (CMA/CNAS mark) will be issued;
- Simultaneous application for China Compulsory Product Certification (CCC) is required: Submit the report through the CQC platform + factory inspection. Sales are only permitted after obtaining the CCC certificate.
II. Key Compliance Points
1. Age Warning Label
If small parts are included, a warning statement "Not suitable for children under 3 years old" must be included (font ≥ 4-point boldface).
2. Structural Safety Enhancement
- Push rod height ≥ 70cm (to prevent children from climbing and tipping over);
- Folding mechanism requires double safety devices to prevent accidental closure.
3. Expanded Chemical Substance Requirements
Starting in 2025, new controls are in place for short-chain chlorinated paraffins (SCCPs) (≤0.15%), requiring a supply chain material commitment letter.
III. Time and Cost Reference
| Project | Cycle | Cost Range
| Basic Testing | 5-7 working days | ¥8.00-¥15.00
IV. Common Failure Points and Prevention
- Chemical Exceeding Standards: Prioritize raw materials certified by EN71-3/CPSC;
- Structural Defects: Folding mechanism must pass 10,000 opening and closing fatigue tests;
- Incomplete Labeling: Packaging must include CCC mark, implementation standard number, manufacturer address, and traceability QR code.
Shen Gongwang Security: 44030602006947