EN71 testing process for children's stuffed toys
Date：2026-03-09 14:06:45 Classification
：【question】 Visits：
The standard processing procedure for EN71 testing of children's stuffed toys (based on the current regulations of 2026) is structured according to the following steps:
1、 Pre preparation stage
1. Product classification confirmation
Determine whether it belongs to the category of "products designed for children under 14 years old to play with"
Clearly define the material composition (such as testing short plush and PP cotton filling separately)
2. Selection of testing standards
Core standards: EN 71-1 (Physical Properties), EN 71-2 (Flammability), EN 71-3 (Heavy Metal Migration)
Supplementary standard: If the sound function is included, the sound pressure requirements of EN 71-1 need to be tested
3. Sample requirements
Provide 3-5 unopened finished products
Must include all detachable components (such as doll clothing, decorations)
2、 Testing implementation phase
1. Physical and mechanical testing (EN 71-1)
Small component testing (to prevent swallowing hazards)
Suture strength test (risk of filler leakage)
Sharp edge/tip inspection
2. Combustion performance testing (EN 71-2)
Determination of surface fuzz burning rate
Flame retardancy test of filling materials
3. Chemical testing (EN 71-3)
Detection of 19 heavy metals in touchable areas (such as lead and cadmium migration)
Add expanded list of phthalates required by 2025
3、 Certification process
1. Laboratory selection
Priority should be given to Dezewei Testing CNAS registration number: L8083
Confirm that the laboratory has all EN 71 qualifications
2. Time and cost
Regular cycle: 5-7 working days (urgent services can be shortened to 3 days)
Basic cost: Approximately 800-1200 (subject to fluctuation depending on specific testing items)
3. Report acquisition
Obtain a testing report with the EU approved mark
Synchronize generation of Declaration of Conformity (DoC)
4、 Subsequent compliance requirements
1. CE mark affixation
CE mark should be prominently marked on the product packaging
The font height shall not be less than 5mm
2. Technical file storage
Retain testing reports, design drawings, etc. for at least 10 years
Responding to EU market regulatory inspections at any time
3. Update and maintain
Material changes require retesting
Pay attention to the annual revision of EN 71 standard (such as the proposed addition of restrictions on azo dyes in 2026)
Special reminder: If the product is exported to Germany at the same time, it must additionally meet the GS certification requirements; The UK market must comply with the UKCA marking regulations. It is recommended to provide full process coaching through a professional third-party organization.
Shen Gongwang Security: 44030602006947