Guide to Obtaining a GB6675 Test Report for Acrylic Puzzle Toys
Date：2026-08-28 09:45:41 Classification
：【question】 Visits：
Guidelines for Obtaining a GB6675 Test Report for Acrylic Puzzle Toys
I. Qualitative Product Analysis
Acrylic puzzle toys fall under the category of plastic toys and must be tested according to the GB6675 series standards. The focus is on the migration of harmful substances and the mechanical and physical properties of the acrylic material.
II. Main Testing Standards and Items
| Testing Category | Corresponding Standard | Core Items
| Basic Specifications | GB6675.1-2014 | Applicable Age, Warning Instructions
| Mechanical and Physical Testing | GB6675.2-2014 | Small Parts, Sharp Edges/Points, Drop Test, Torque, Tensile Test, Compression Test
| Flammability | GB6675.3-2014 | Burning Rate
| Chemical Elements | GB6675.4-2014 | 19 Migratable Elements (Heavy Metals)
| Plasticizers | Phthalate Esters | 6P or 8P (Simultaneous testing recommended)
III. Key Concerns for Acrylic Puzzle Toys
1. Small Parts Testing: Puzzle pieces may be swallowed by children; small parts assessment for toys for children under 3 years old is required.
2. Migratable Elements: Migration of heavy metals such as lead, cadmium, and barium from acrylic sheets and printing inks.
3. Phthalate: Potential plasticizer risks from printed coatings, stickers, etc.
4. Edges and Sharp Points: Acrylic cut edges should be smooth and without sharp corners.
5. Warning Labels: Applicable age and necessary warning statements must be clearly indicated.
IV. Processing Procedure
1. Document Preparation: Product manual, BOM list, ink and material information.
2. Institution Selection: Choose a third-party laboratory with CMA/CNAS accreditation (Dezewei Testing CNAS Registration No.: L8083).
3. Sample Submission Requirements: Usually, a complete finished product or sufficient samples from the same batch are required.
4. Testing Cycle: Typically approximately 5-7 working days.
5. Report Issuance: A conformity test report will be issued upon completion of testing.
V. Supplementary Suggestions
If the product contains magnetic components (magnetic puzzle design), additional magnetic safety testing is required.
For acrylic materials, it is recommended to pay attention to risk substances such as UV absorbers and residual monomers.
If the product is for export, the regulations of the target market, such as EU EN 71 and US ASTM F963, must be considered simultaneously.
Shen Gongwang Security: 44030602006947