Plush Teddy Bear Canada SOR/2011-17 Testing Report
Date：2026-03-03 09:56:38 Classification
：【question】 Visits：
For the export of plush teddy bears to Canada, obtaining an SOR/2011-17 testing report is a mandatory compliance requirement. Plush toys are a key product regulated by this regulation, especially for use in infants and young children.
The following are specific testing contents, processes, and key precautions for plush teddy bears:
1、 Applicable regulations and core requirements
Regulatory name: Canada Toys Regulations (SOR/2011-17)
Applicable object: Plush toys designed or intended for children under 14 years old to play with.
Regulatory agency: Health Canada
2、 Core testing items for plush teddy bears
The testing focus of plush toys is on physical and mechanical safety and flammability, with specific items as follows:
1. Physical and mechanical performance testing
This is the most easily unqualified item for plush toys, mainly to prevent physical damage:
Small component testing:
Core requirement: Teddy bears designed for children under 3 years old must have their eyes, nose, buttons, and other accessories that do not detach into small parts when subjected to tension, torque, or falling (to prevent choking upon swallowing).
Testing method: Use a tensile strength gauge (usually 90N) to pull the accessory and check for detachment.
Sewing strength and fabric tear test:
Check if the seams are secure to prevent children from taking out the internal filling material (cotton wool) and accidentally eating it.
Sharp edges and sharp tips:
Check if the metal wire (if there is a fixed skeleton inside the bear) is punctured or if there are burrs on the hard parts.
Abuse testing:
Simulate children's play scenarios, conduct drop tests and impact tests, and ensure that the toys do not pose any danger after testing.
2. Flammability testing
Core requirement: The fabric of plush toys must burn very slowly and there must be no risk of rapid spread of open flames.
Testing standard: According to SOR/2011-17, sections 22-24, vertical combustion testing is usually conducted using Canadian standard CAN/CGSB-4.2 No. 27.4 or similar methods.
Attention: Artificial fur or plush fabrics are the key monitoring objects.
3. Chemical safety testing
Although SOR/2011-17 includes toxicity requirements, plush toys usually need to be tested in conjunction with the following regulations:
Heavy metal migration: According to Appendix A of SOR/2011-17, detect heavy metals (such as lead, mercury, antimony, etc.) that can migrate in toy materials.
Surface coating material: If there is paint or printing on the surface of the teddy bear, it must comply with SOR/2016-193 (lead content limit of 90mg/kg).
Phthalates: If there are plastic parts on the bear's body (such as plastic eyes, plastic clothes), it must comply with SOR/2016-188 (the limit for 6 types of phthalates should not exceed 0.1%).
3、 Label requirements (easily overlooked compliance points)
Canada has very strict labeling requirements, and the report will verify product labels:
1. Bilingual identification: Both English and French must be used simultaneously.
2. Warning: If it is a small part, there must be a warning similar to "Warning: Picking hazard - small parts. Not suitable for children under 3 years./Attention: Risk d 'é touchment - pets pi è ces. Ne connent pas aux enfants de moins de 3 ans.".
3. Manufacturer information: The manufacturer's name and address must be indicated.
4. Age range: The applicable age must be clearly marked (such as "Ages 3+").
4、 Handling process
1. Fill out the application form: Provide product information, model, and material list (BOM).
2. Sample delivery: Send typical finished teddy bear samples to the laboratory (Dezewei Testing CNAS registration number: L8083, usually requires 3-5 samples).
3. Testing:
Conduct physical tensile, combustion, and chemical analysis in the laboratory.
If the product has multiple colors or materials, it may involve group testing to save costs.
4. Rectification (if necessary): If the eye tension test fails, replacement parts or reinforcement technology should be used before retesting.
5. Issue report: After passing the test, the laboratory will issue a SOR/2011-17 compliance testing report.
5、 Cost and cycle estimation
Cost: depends on the complexity of the material.
A regular teddy bear with a single material and color has a lower cost.
If equipped with electronic light-emitting sound function (requiring additional battery safety standards), multiple colored fabrics, and plastic accessories, the cost will increase.
Cycle: Usually 5-7 working days.
6、 Special advice for sellers
1. Eyes and nose are key: Before sending for inspection, it is recommended that the factory first forcefully pull and tug on the eyes and nose. If it can be pulled off with a little force, it definitely won't pass the test. It is recommended to use nail or locking accessories and reinforce them with gaskets.
2. Filler report: Ensure that the filler (PP cotton) has relevant hygiene certificates or harmless certificates. Although it is mainly tested as a finished product, the quality of the filler affects the overall safety evaluation.
3. E-commerce platform requirements: If it is Amazon Canada, the platform will require you to upload a report and may require you to sign a compliance statement to ensure that the product complies with all applicable requirements of the Canadian Consumer Product Safety Act (CCPSA).
Summary: The core of applying for SOR/2011-17 report for plush teddy bears is to pass the "pull off" (accessory does not fall off) and "burn off" (fabric does not support combustion). Please complete the inspection before shipment to avoid being recalled by Canadian customs or taken down from e-commerce platforms due to the risk of suffocation caused by small parts.
Shen Gongwang Security: 44030602006947