Sound-producing toys: Canadian SOR/2011-17 certification process
Date：2026-01-22 09:22:35 Classification
：【question】 Visits：
Toys with sound-generating functions require a general process for obtaining Canadian SOR/2011-17 certification, but special attention must be paid to the specific testing requirements for the sound-generating module. The specific process is as follows:
I. Preliminary Preparation: Selecting an Institution + Preparing Documents and Samples
1. Selecting a Compliant Testing Institution
Choose a third-party laboratory officially recognized by Canada and possessing ISO17025 accreditation (such as Dezeway Testing, CNAS registration number: L8083). Prioritize institutions with experience in testing sound-generating toys, familiar with specific areas such as noise testing and electrical safety testing.
2. Document and Sample Preparation
Technical Documents:
Product Instruction Manual (must include safety warnings in both English and French, such as protection for sound-generating components and noise warnings);
Bill of Materials (indicating the material of the sound-generating module, battery type, wire sheath composition, etc.);
Design Drawings (clearly defining the fixing structure of the sound-generating component and the volume adjustment mechanism).
Physical Samples:
Provide 3-5 complete finished products (including packaging, batteries, and sound-generating accessories);
Disassemble the core sound-generating components (such as speakers, buttons, and circuit boards) and label them individually for specific testing;
If it is a battery-powered sound-generating toy, additional samples of the battery and power supply module are required.
II. Formal Application and Sample Submission
1. Complete the SOR/2011-17 certification application form from the testing organization, clearly indicating the regulations to be complied with: core regulation SOR/2011-17, and supporting regulations SOR/2016-188 (phthalates), SOR/2018-83 (lead), and SOR/2016-193 (surface coatings).
2. Mail the physical samples to the laboratory, simultaneously submit electronic technical documents, and pay the testing fees (basic testing 800-1500 RMB/model; additional fees apply for electrical components).
III. Specialized Laboratory Testing (Focusing on Sound-Making Toys)
The laboratory will conduct comprehensive testing on the characteristics of sound-making toys. Core tests include:
1. General Safety Testing
Physical and Mechanical Properties: Testing the sturdiness of sound-producing components (such as buttons and speaker covers). These components should not detach and form small parts under normal use/abuse, avoiding suffocation risks; edges and corners should be rounded and free of sharp points.
Chemical Safety: Testing the heavy metal (lead ≤ 100 ppm) and phthalate (DEHP/DBP, etc. ≤ 1000 mg/kg) content in the plastic shell of the sound-producing module and the outer sheath of the wires; surface coating lead ≤ 90 mg/kg.
Flame Retardant Properties: Testing the flame retardancy of the plastic, fabric, and other materials of the sound-making toy to meet Canadian toy fire safety standards.
2. Specialized Testing for Sound-Making Toys
Noise Testing: Testing the volume when used near the ear, ensuring it does not exceed 100 decibels to avoid damaging children's hearing; noise levels from toys not used near the ear must also be controlled within safe limits.
Electrical Safety Testing (for electrically powered toys): Test the voltage of the battery drive module (must not exceed 24 volts), short-circuit/overheat protection performance, and avoid risks of electric shock and fire.
3. Packaging Compliance Testing
If using soft film packaging bags, the thickness must be ≥0.019mm when the opening circumference is ≥35.3cm, and a suffocation warning in both English and French must be clearly marked.
IV. Report Review and Delivery
1. The standard testing cycle is 5-7 business days. If electrical or noise tests fail and rectification is required, the cycle will be extended by 3-5 days.
2. After passing the tests, the laboratory will issue a test report in both English and French, which must include the test method (e.g., ASTM F963), a comparison of measured values with regulatory limits, and a clear compliance conclusion.
V. Market Access and Subsequent Maintenance
1. Platform Listing: For Amazon Canada, the test report, product images with bilingual warnings, and an ASIN list must be uploaded. The review cycle is approximately 3-5 days.
2. Labeling Compliance: Product packaging must include bilingual (English and French) information: age rating (e.g., "3+"), manufacturer information, noise/small parts warning, and batch number (to meet traceability requirements).
3. Subsequent Monitoring: Attention must be paid to updates to Canadian regulations (such as new phthalate restrictions or adjustments to safety standards for sound-generating components). Retesting is required upon product iteration or regulatory updates.
Shen Gongwang Security: 44030602006947